基于表界面反应及优化的锂金属电池研究进展

金属锂具有高理论比容量和低还原电位, 是锂电池阳极的理想材料之一. 但在长期循环充放电过程中, 金属锂因锂枝晶生长会导致出现界面恶化及能量损失严重等问题, 对锂金属电极与电解质表界面反应的优化是一个重要研究方向. 本文介绍了锂枝晶产生的危害, 从分析及抑制锂枝晶沉积两方面综合评述了为解决这一问题所采取的方法, 包括固态电解质界面形成机制和保护机理、 表面改性、 三维锂阳极和液态/固态电解质等方法, 总结了各种方法的优劣势, 并展望锂金属电池在能源领域的研究前景.     

基于多孔金结构的三相界面酶电极的制备及高效电化学酶传感性能

界面微环境是影响酶催化反应及酶传感性能的关键因素. 本研究基于三维微纳米结构多孔金基底, 通过调控电极表面的亲水和疏水浸润性, 制备了具有固-液-气三相界面微环境的氧化酶电极, 并研究了界面微环境对酶催化反应动力学的影响规律. 基于所制备的三相界面多孔金结构酶电极, 反应物氧气能够从气相直接快速地传输到酶催化反应界面, 极大地提升了界面氧气浓度及其稳定性, 从而大幅度提高了氧化酶活性及酶电极响应的稳定性. 以葡萄糖为模型待测物, 基于该三相界面酶电极的电化学酶生物传感器拥有宽的线性范围、 高的灵敏度、 低的检出限以及良好的稳定性. 这类独特的三相反应界面设计为高效酶生物传感器的建构以及生物分子的精准检测提供了新思路.     

Interface formation of Al2O3 on n‐GaN(0001): Photoelectron spectroscopy studies

Al₂O₃ insulator layers were deposited step by step by the physical vapor deposition (PVD) method onto gallium nitride in the wurtzite form, n‐type and (0001)‐oriented. The substrate surface and the early stages of Al₂O₃/n‐GaN(0001) interface formation were characterized in situ under ultra‐high vacuum conditions by X‐ray and ultraviolet photoelectron spectroscopy (XPS, UPS). The electron affinity (EA) of the substrate cleaned by annealing was 3.6 eV. Binding energies of the Al 2p (76.0 eV) and the O 1s (532.9 eV) confirmed the creation of the Al₂O₃ compound in the deposited film for which the EA was 1.6 eV. The Al₂O₃ film was found to be amorphous with a bandgap of 6.9 eV determined from the O 1s loss feature. As a result, the calculated Al₂O₃/n‐GaN(0001) valence band offset (VBO) is ?1.3 eV and the corresponding conduction band offset (CBO) 2.2 eV.     

单分子层受限冰-水共存界线毛细波与固-液相变动力学

冰-水界面动力学性质在冰形核、生长、表界面熔化中扮演核心角色, 长期以来一直被广泛关注. 然而, 受限水体系中冰-水界面的动力学性质却鲜有报道. 本工作利用平衡态分子动力学模拟方法和受限固-液两相平衡模拟技术, 对两种水模型(恒定偶极矩、可极化)描述的单分子层受限冰-水两相平衡体系中的一维固-液界线开展研究. 通过对一维受限冰-水界线的追踪, 计算了其热涨落波动的振幅与时间自关联函数色散谱, 进而计算一系列固-液界线动力学性质. 冰-水界线波动在短波长区域复合了快、慢两种不同时间尺度的弛豫过程, 在长波长区域则由慢弛豫过程主导. 相比块体冰-水界面体系, 以Rayleigh波为主的高频微观物理过程更多地参与了一维冰-水界线的动力学弛豫. 我们发现冰-水界线波动弛豫特征衰减时间的波矢依赖关系符合现有固-液界面动力学理论, 但一维界线弛豫的特征衰减时间比二维界面体系低了一个数量级左右. 计算了两种水模型体系冰-水界线的动力学系数, 并与块体冰-水界面比较, 发现受限冰-水(固-液)界线动力学系数远高于块体冰-水界面体系. 我们推测水分子转动自由度在受限腔中被强烈压制可能是导致受限体系超快冰-水(固-液)相变速率的主要原因. 本工作将在受限水体系超快相变(储能、传感)器件的设计工作中提供一定的理论指导意义.     

Al2O3/PDMS复合材料热传导的分子动力学模拟

采用分子动力学模拟方法研究了Al₂O₃/聚甲基二硅氧烷(PDMS)复合材料在300 K时的传热行为, 通过分析热传导、温度梯度以及导热增强等理论数据, 讨论了不同半径以及不同浓度的Al₂O₃填料粒子对PDMS传热的影响. 结果表明随着体积分数的增大, Al₂O₃/PDMS复合材料的热传导先减小后增加. 并且当Al₂O₃填充粒子的半径为5 nm时, Al₂O₃/PDMS复合材料的热传导达到最大值. 通过考察传热过程中的Al₂O₃填料和Al₂O₃/PDMS复合材料的温度和结构变化, 添加有小半径Al₂O₃填料的Al₂O₃/PDMS复合材料在传热的过程中主要以声子的形式进行传热, 此时决定热导率的主要因素有热容c、声子的平均速度v和声子的平均自由程l. 同时, 当体积分数为15%时, 传导链形成, 热量可以顺利通过Al₂O₃填料形成的传导链传播, 有助于热传导的增加.     

Remarks on Sharp Interface Limit for an Incompressible Navier-Stokes and Allen-Cahn Coupled System*

The authors are concerned with the sharp interface limit for an incompressible Navier-Stokes and Allen-Cahn coupled system in this paper. When the thickness of the diffuse interfacial zone, which is parameterized by ε, goes to zero, they prove that a solution of the incompressible Navier-Stokes and Allen-Cahn coupled system converges to a solution of a sharp interface model in the L^∞(L²) ∩ L²(H¹) sense on a uniform time interval independent of the smal...     

A Finite Volume Method Preserving Maximum Principle for the Conjugate Heat Transfer Problems with General Interface Conditions

In this paper, we present a unified finite volume method preserving discrete maximum principle (DMP) for the conjugate heat transfer problems with general interface conditions. We prove the existence of the numerical solution and the DMP-preserving property. Numerical experiments show that the nonlinear iteration numbers of the scheme in [24] increase rapidly when the interfacial coefficients decrease to zero. In contrast, the nonlinear iteration numbers of the unified scheme do not increase when the interfacial coefficients decrease to zero, which reveals that the unified scheme is more robust than the scheme in [24]. The accuracy and DMP-preserving property of the scheme are also veried in the numerical experiments.     

Effect of Intercalated LiF on Interface Contact Characteristics of MoS2 Field Effect Transistor: A First-Principles Study

Based on the first-principles calculation, the effect of intercalated LiF on the contact characteristics of the interface between Au electrode and MoS₂ layer is studied. It is found that adding LiF film can change the contact type between metal electrode Au and MoS₂ layer from Schottky contact to ohmic contact, which is accompanied by interfacial charge transfer from LiF layer to MoS₂ layer and the downward movement of d (d_xy and d_z2) orbital of Mo atom and p (p_x and p_y) orbital of S atom to Fermi level. And the interlayer spacing between LiF layer and Au electrode has a great impact on the interface contact characteristics. The electric field effect and stress effect of interface contact of Au, LiF and MoS₂ (Au/LiF/MoS₂)is more obvious than that of interface contact of Au and MoS₂ (Au/MoS₂). Au/LiF/MoS₂ shows ohmic contact with the interlayer spacing between Au layer and LiF layer less than 3.05 Å and with the electric field less than 0.15 VÅ⁻¹, respectively, while Au/MoS₂ still shows N-type Schottky contact. These findings are helpful to control the contact resistance and have guiding significance for high performance MoS₂ field effect transistor and other electronic components.     

Absorbing Interface Conditions for the Simulation of Wave Propagation on Non-Uniform Meshes

We proposed absorbing interface conditions for the simulation of linear wave propagation on non-uniform meshes. Based on the superposition principle of second-order linear wave equations, we decompose the interface condition problem into two subproblems around the interface: for the first one the conventional artificial absorbing boundary conditions is applied, while for the second one, the local analytic solutions can be derived. The proposed interface conditions permit a two-way transmission of low-frequency waves across mesh interfaces which can be supported by both coarse and fine meshes, and perform a one-way absorption of high-frequency waves which can only be supported by fine meshes when they travel from fine mesh regions to coarse ones. Numerical examples are presented to illustrate the efficiency of the proposed absorbing interface conditions.     

镍基合金掺杂W、Mo原子在γ/γ＇相界面扩散机理研究

运用基于密度泛函理论的第一性原理,研究掺杂W、Mo在镍基高温合金的沉淀强化γ′相分配差异的因素.通过VASP软件,建立γ′-Ni₃(Al_3/8Ti_5/8)相的体系模型,选取非等效位置的不同阵点,计算W、Mo原子在不同位置的替代形成能,分析W、Mo在γ′相的占位倾向;计算掺杂W、Mo原子前后,界面的吸附能,研究掺杂W、Mo对相界的影响;计算W、Mo原子从γ向γ′相扩散,获得W、Mo扩散的路径与势垒.结果表明,W、Mo的掺杂优先替代γ′-Ni₃(Al_3/8Ti_5/8)相5号Al原子,并提高相界的稳定性;分配的差异是W相比于Mo替代γ′相位置的Al原子更易形成空位,而γ相中的Ni原子较难形成空位,且逆扩散所需能量更多导致的.